Deep Cycle life 12V 30Ah UPS Replacement Battery For UPS , Solar
System And UPS
Specifications:
| Item | Parameter | Remark |
| Rating Voltage | 12V | |
| Capacity | Typical:20Ah | 0.2C discharge after full charge.. |
| Charge Voltage | 12.6V | |
| Impedance | 80mΩ(Max) | |
| Charging Mode | C.C/C.V. | Constant Current /Constant Voltage |
| Charging Metho | Standard Charging 0.2C | Charging Current 4000mA |
| Charging Time | Standard Charging | (5-6)Hours | |
End of Discharge Voltage | 9.0V | |
| Maximum size battery pack | 86mm*70mm*155mm | |
| Operating Temperature | Charging | 0～45℃ | |
Discharging
| (-20～60)℃ |
| Storage Temperature | (-10℃～35)℃ Recommend(25±5℃) | Storage capacity should be 40%~50% full charge capacity |
| Cycle Life | 1000 cycle | 0.5C charge and discharge |
A UPS battery is short for uninterruptible power supply. It is designed to be
used with various electronics, especially computers and telecom
systems where a power outage could potentially be catastrophic,
it’s actually be used on numerous industry in your home and
business .
Battery pack Performance:
1, Longer Cycle Life: the capacity can stay 80% min after Over 2000 cycles
2, Lower cost : the longer cycle life can balanced the cost of the battery than
the lead-acid battery ,can save the cost
3, without Memory Effective: Always ready for charge and use, without need to charge again
after a full discharge.
4, Wide working Temperature ranges: can be used in the temperature ranges from -20° C to 65° C
5, Intelligent Charge System: Voltage of each battery can be detected and protected against
overcharge, overvoltage, short circuit and overheat and balanced
function, can read out the capacity of each cells
Applications:
1.Pure and hybrid electric car, electric bus , electric vehicles ,
recreational vehicles
2.solar and wind energy storage , solar streetlights ,household
energy storage
3.communication base station and utility power supply ,emergency
power supply
Shipment :
1. Based on the character of cell, need to make an environment for
transportation of LiFePO4 battery pack
2. Battery should be keep at -20°C~45°C in warehouse where it’s
dry, clean and well-ventilated environment .
3. when delivery , we must pay more attention :dropping, extrusion
and serious stacking.
