48V20Ah ESS Battery lifepo4 battery with longer cyclelife for
telecom back up power
Description:
1.This product are based on the telecom operator are suitable for
the back-up power supply under the new communication trend for
development ,with integration , miniaturization, Light-duty
Intelligentize , standardization ,Green Environmental Protection
etc.
The LiFePO4 battery pack with IBS models system and consist of 30S
single 3.2V10AH cell and BMS system place to 19 inch 2U standard
rack crate.
2.Multiple modules can be connected in parallel to increase the
output power and capacity ,can set the each back up power address
via address switch , then by connect with RS485 interface to
cascade communication .
Specification :
Model | Standard voltage | Standard capacity | mm Dimension | kg Weigh | Remark |
SDDX-9610 | 48V | 20Ah | 2U(440*400*88) | 13±1 | 2U Cubical |
configuration | cell 3.2V10Ah ,30S single battery in series |
Working temperature | -20℃～60℃ |
Storage temperature | -10℃～65℃ |
Relative humidity | ≤90％(40℃±2℃) |
Altitude | 0～5000 m |
Charge mode | Intelligent interrupt charge |
Average total voltage | 53.25V |
Cell Average voltage | 3.55V |
Float total voltage | 51V |
Total voltage overvoltage alarm | 54V |
Total voltage overvoltage alarm | 54.0V |
Total voltage overvoltage protection | 50.5V |
Total voltage overvoltage protection | 54.7V |
Battery Pack system function :
1. safety protection and Alarm function.
1.Overvoltage protection
2.Over discharge protection
3.Short circuit protection
4.Protection of opposite connection
2. Monitoring and communication
1)This system matched the RS232 upper interface and RS485 cascade
interface can meet with the communication protocol, can remote
control the Average voltage and Float voltage charge .and also can
provide the PC protocol ,access station dynamic environmental
control system .
2)Telemetry : Battery capacity ,battery pack/ battery voltage ,battery pack/
battery current ,environment /battery pack /PCBA plate temperature,
battery pack charge /discharge current ,SOH
3)Telecontrol: Open/Close, charge/discharge test ,the alarm sound
switch ,intelligent interrupt charge
4)Teleadjusting : battery pack charge /discharge parameters
Applications:
Data Center (IT / Industrial / Defense),Telecom,Off-grid ESS
Peak Load Shaving: Programmable energy control plans to optimize
peak load reduction
Demand Response: Targeted energy dispatch upon demand response
signals
Voltage Support: Grid and critical load voltage support in response
to low-voltage events
Renewable Integration: Integrated with renewable energy.
User Interface: Web-based application for control and monitoring
